Gooch, J. W. (2007). Encyclopedic Dictionary of Polymers. Springer-Verlag. https://doi.org/10.1007/978-1-4419-6247-8

Felder, E.;Darque-Ceretti, E. (2003). Adhésion et Adhérence. CNRS.

Medkour, M., Najih, Y., Bengourram, J., El Ghmari, A., Bachaoui, M., Latrache, H., Mabrouki, M. (2022). Mechanical and thermal characterization of natural phosphate: Clogging understanding (Part 1), Materials Today: Proceedings, 51(6), 2032–2039. https://doi.org/10.1016/j.matpr.2021.06.261

Baldan, A. (2004). Review. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pretreatment. Journal of Material Science, 39, 1–49. doi: 10.1023/B:JMSC.0000007726.58758.e4

Meng, Y. J., Lai, J., Mo, Sh. Y., Fang, G. P., Deng, Sh. W., Wei, X. Zh., Yang, F. Y. (2023). Investigating the deterioration mechanism of adhesion between asphalt and aggregate interface under acid rain erosion, Applied Surface Science, 639, 158171.

https://doi.org/10.1016/j.apsusc.2023.158171

Awaja, F., Gilbert, M., Kelly, G., Fox, B., Pigram, P. J. (2009). Adhesion of polymers. Progress in polymer science, 34, 948–968. https://doi.org/10.1016/j.progpolymsci.2009.04.007

Yin, W., Xie, Y., Yao, J., Song, N., Chen, K., Yin, X. (2023). Study on the effect of flocculation morphology on the floatability of talc flocs and the adhesion mechanism with air bubbles, Minerals Engineering, 203, 108317. https://doi.org/10.1016/j.mineng.2023.108317

Baldan, A. (2012). Adhesion phenomena in bonded joints. International Journal of Adhesion & Adhesives, 38, 95–116. https://doi.org/10.1016/j.ijadhadh.2012.04.007

Sun, J., Yamanaka, K., Zhou, Sh., Saito, H., Ichikawa, Y., Ogawa, K., Chiba, A. (2022). Adhesion mechanism of cold-sprayed Sn coatings on carbon fiber reinforced plastics, Applied Surface Science, 579, 151873.

https://doi.org/10.1016/j.apsusc.2021.151873

Gerberich, W. W.; Cordill, M. J. (2006). Physics of Adhesion. Report on Progress in Physics, 69, 2157–2203. https://doi.10.1088/0034-4885/69/7/R03

Homma, S., Shima, M., Takano, Y., Watanabe, T., Murakami, K., Fukuda, M., Imoto, T. (2022). Hiroshi Nishikawa, Adhesion mechanism between mold resin and sputtered copper for electromagnetic wave shield packages, Thin Solid Films, 750, 139188. https: //doi.org/10.1016/j.tsf.2022.139188

Stendardo, L., Gastaldo, G., Budinger, M., Pommier-Budinger, V., Tagliaro, I., Ibáñez-Ibáñez, P. F., Antonini, C. (2023). Reframing ice adhesion mechanisms on a solid surface, Applied Surface Science,

, 158462. https://doi.org/10.1016/j.apsusc.2023.158462

Bico, J., Tordeux, C., Quéré, D. (2001). Rough wetting. Europhysics Letters, 55, 214–220.

doi 10.1209/epl/i2001-00402-x

Quéré, D. (2008). Wetting and roughness. Annuel Review of Materials Research, 2008, 38, 71–99. https://doi.org/10.1146/annurev.matsci.38.060407.132434

Bico, J., Marzolin, C., Quere, D. (1999). Pearl Drops. Europhysics Letters, 1999, 47, 220–226. doi:10.1209/epl/i1999-00548-y

Nosonovsky, M., Bhushan, B. (2009). Superhydrophobic surfaces and emerging applications: Non-adhesion, energy, green engineering. Curr. Opin. Colloid Interface Sci., 14, 270–280. https://doi.org/10.1016/j.cocis.2009.05.004

Lafuma, A.; Quere, D. (2003). Superhydrophobic states. Nat. Mater., 2, 457–460. https://doi.org/10.1038/nmat924

Munoz-Bonilla, A., Bousquet, A., Ibarboure, E., Papon, E., Labrugère, C., Rodriguez Hernandez, J. (2010). Fabrication and Superhydrophobic Behavior of Fluorinated Microspheres. Langmuir, 2010, 26, 16775–16781. https://doi.org/10.1021/la102686y

Bhushan, B., Jung, Y. C. (2011). Natural and biomimetic artificial surfaces for super-hydrophobicity, self-cleaning, low adhesion, and drag reduction. Prog. Mater. Sci., 2011, 56, 1–108. https://doi.org/10.1016/j.pmatsci.2010.04.003

Schweigert, D., Damson, B., Lüders, H., Stephan, P., Deutschmann, O. (2020). The effect of wetting characteristics, thermophysical properties, and roughness on spray-wall heat transfer in selective catalytic reduction systems. International Journal of Heat and Mass Transfer, 152, 119554. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119554

Elyaagoubi, M., Najih, Y., Khadiri, M., Mabrouki, M. Oueriagli, A. Outzourhit, A. (2017). Electrochemically deposited Bismuth-Telluride nanowires in nanoporous alumina membranes. Journal of Materials and Environmental Sciences, 8. 2070–2075.

Adar, M., Najih, Y., Charafih, Y., Rahmani, K., Khaouch, Z., Mabrouki, M. (2019). Elaboration And Characterization Of Zno Thin Films Structural And Optical Study. Journal of Physics: Conference Series. doi: 10.1088/1742-6596/1292/1/012009

Najih, Y. A., Charafih, М., Rahmani, Y., Khalid Khouch, Z., Jamaa, B., Nourreeddine, K., Mabrouki, M. (2019). Characterization of ZnO thin films elaborated by cathodic sputtering with different oxygen percentages: investigation of surface energy. Journal of Physics: Conference Series., 1292, 012015. doi: 10.1088/1742-6596/1292/1/012015

Van Oss C. J. (2006). Interfacial Forces in Aqueous Media, second ed, CRC Press, New York. https://doi.org/10.1201/9781420015768

Young, T. (1805). An essay on the cohesion of fluids. Phil. Trans. Soc. [Lon2d], 95, 65. http://dx.doi.org/10.1098/rstl.1805.0005

Van Oss, C.J., Good, R.J., Chaudhury, M.K., J. (1986). Nature of the antigen-antibody interaction: Primary and secondary bonds: Optimal conditions for association and dissociation, Coll. Inter. Sci., 376, 111, 1986. https://doi.org/10.1016/S0378-4347(00)80828-2

Wang, X., Wei, S., Wang, X., Chang, K., Yang, H., Wang, Y. (2023). Synergetic improvements in surface hydrophobicity and wear resistance of TC4 materials via the combination of rapid heating and EtOH quenching methods, Journal of Alloys and Compounds, 172582.

https://doi.org/10.1016/j.jallcom.2023.172582

Clint, J. H. (2001). Adhesion and components of solid surface energies. Current opinion in Colloid and Interface Science, 2001, 6, 28–33. doi: 10.1016/S1359-0294(00)00084-4

Adams, R.D. (2010). Adhesive Bonding. Science, Technology and Applications. UK: Wood head Publishing Limited.

Yan, C., Zhu, Y., Liu, D., Xu, H., Chen, G., Chen, M., Cai, G. (2023). Improving interfacial adhesion and mechanical properties of carbon fiber reinforced polyamide 6 composites with environment-friendly water-based sizing agent, Composites Part B: Engineering, 258, 110675.

https://doi.org/10.1016/j.compositesb.2023.110675.

Brockmann, W., Geiß, P.L., Klingen, J., Schröder, B. (2009). Adhesive Bonding. Materials, Applications and Technology. Germany: Wiley-Vch Press, Weinheim.